DS-1 MK3
DS-1 MK3DS-1 MK3_01DS-1 MK3_02

DS1-MK3

[가격문의]

카테고리: . 태그: , , , , , .

상품설명

DS1-MK3

Weiss DS1-MK3, the reference when it comes to digital mastering Compressors and De-Essers. An extremely versatile single band limiter/compressor with M/S mode and Parallel Compression facilities.

 

 

The Weiss 102 Series split band De-Esser was one of the mastering industry’s most highly praised digital product. With the DS1-MK3 the Weiss engineers have taken their de-esser design and combined it with the best features of the time proven 102 Series Dynamics Processors. The result is a stand alone digital Dynamics Processor with unparalleled performance and sonic integrity.

In de-esser mode the compression band is selectable as a lowpass, bandpass or highpass and extends the functionality beyond de-essing. The crossover filters are linear phase for the highest sonic quality. The full band dynamics processor with soft knee compressor and hard limiter is ideal for program loudness control.

 

“The sound of the DS1-MK3 is impeccable. It is the most transparent, refined, flexible and least ‘digital sounding’ dynamics processor I have ever used. It is indispensable; I use it on over 90 percent of my mastering projects.”

Bob Katz, Digital Domain, USA

 

 

Controls, display
There are a total of twelve knobs in order to almost have a “one knob per parameter” operation. The knobs are touch sensitive to switch the LCD to display the associated parameters. The LCD shows a graphical representation of the transfer function, input and output level meters and gain reduction meters. In addition there is a graphical indication of the split band characteristic. All parameters are shown in numerical format as well.

 

Snapshots, MIDI, metering
Other basic features are an A/B compare memory, a 128 position snapshot bank with two additional banks for back-up (can also be dumped/recovered via MIDI), over indicators, MIDI control for each parameter, an overall bypass switch and an overall gain control, a channel ganging switch.

 

Signal processing, connectivitiy
The internal processing is done at 88.2 or 96 kHz in a 40 Bit floating-point format. 44.1 or 48 kHz input signals are up- and down-sampled accordingly. The side chain is up-sampled for more precise peak detection. The output can be POW-R dithered to 16, 20 or 24 Bits. The DS1-MK3 can be set such that the unit is Bit transparent as long as there is no gain-reduction happening. This is the case even if the split-band filter is enabled. The digital input/output are in AES/EBU format on XLR connectors.

 

Split band filter
The split band filter is a linear phase design and can be switched to lowpass, bandpass, highpass or bypass characteristic. The center frequency of the filter can be set to very low frequencies as well, allowing to process bass instruments.

 

Threshold, ratio
The threshold parameter covers a huge range, which is useful for settings with small ratio values and very low threshold values for subtle compression over the whole level range. The ratio parameter can be set to values below one to up about 1000. Thus the DS1-MK3 can be used for upward expansion as well. The soft knee parameter allows to soften the transition between the linear and non-linear portions of the transfer curve.

 

Timing
Plenty of timing parameters allow for a wide range of applications. Attack, release and release delay parameters are there. The release portion can be set to a semi-automatic mode with three timing parameters controlling it. The preview delay controls the look-ahead time for the side-chain and finally the overall delay of the whole DS1-MK3 unit can be specified in seconds and also in video frames at various frame rates.

 

M/S mode, parallel compression
The DS1-MK3 can be switched to M/S mode which is especially useful for e.g. de-essing the voice of a singer. Thus the two channels can be set completely independent from each other, a feature which usually is required in M/S mode, but can also be useful in L/R mode when the two channels need different treatment. The side-chains can be linked or un-linked as required. A very useful feature is the so-called parallel compression which adds the input signal to the output signal. The effect is that lower levels are raised while higher levels are left alone. This makes for the least intrusive treatment with the least artifacts.

 

Level detection, peak limiter
The level detection in the side-chain can be switched between peak detection and RMS detection. After the main compressor section of the DS1-MK3 there is an additional peak limiter inserted. This limiter is meant to catch occasional peaks. It can be switched on/off and the audio level into that peak limiter can be set, allowing for just the right amount of additional limiting.

 

Gains
Gains in the DS1-MK3 include an overall output gain at the very end of the processing chain. Then a gain just ahead of the safety limiter for driving the limiter as mentioned above. The make-up gain can be set to automatic for the highest output level with any setting or can be changed manually.

 

Split-band filter monitor
The Monitor key allows to listen to the portion filtered by the split-band filter. A useful feature e.g. for zooming in on sibilances for de-essing.

 

Factory presets
The DS1-MK3 comes with several factory presets for various typical tasks. Most of the factory presets have been programmed by Mr. Bob Katz of Digital Domain Mastering.

 

An extremely versatile unit indeed. The timing parameters like attack, release, release delay, preview delay cover wide ranges and thus allow for “exotic” settings for even the most challenging compression tasks. The auto-release mode reduces potential pumping problems with difficult signals.

 

The DS1-MK3 can be inserted into any digital audio chain with sampling rates between 44.1 and 96 kHz. The synchronization is done via the AES/EBU input signal.

 

The DS1-MK3 is used for many different tasks, starting with full band stereo compression/limiting, split band mode processing, namely de-essing or bass compression, M/S mode processing, e.g. for reverberation treatment or de-essing, parallel compression for subtle, non-intrusive compression, independent processing between left and right to correct for balancing problems and much more.

 

 

size

 

 

Power
Mains voltage: 115 V or 230 V with voltage selector
Fuse rating: 500 mA slow blow
Power consumption: 40 VA max.

 

Size
Depth: 30 cm
Width: 43,3 cm (19″)
Height: 8,8 cm (2HU)

 

AES/EBU Input
Sampling frequencies: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
Maximum input word-length: 24 Bits
Channel Status Data: Input accepts professional or consumer format.
Channel Status Data Bits forwarded to AES/EBU output: see table below
Connector: XLR female

 

AES/EBU Output
Sampling frequencies: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz (always the same as the input)
Output word-length: 24 Bits
Connector: XLR male

 

AES/EBU Channel Status Data
The DS1 allows to convert the incoming Channel Status Data as follows:
From Consumer to Professional
From Professional to Consumer
Transparent mode, i.e. Channel Status Data is fed forward to the output without any conversion (one exception, see below)

The following tables describe how the output Channel Status Data Bits are generated in the various conversion modes.

 

Output selected: Consumer format, Input: Consumer format:
All Bits fed forward (transparent), except for Byte 1:
Bits 0…6: 0000000 (category code general)
Bit 7: 1 (original)

 

Output selected: Consumer format, Input: Professional format:

  • Byte 0:
  • Bit 0: 0 (consumer)
  • Bit 1: 0 (audio)
  • Bit 2: 1 (copy allowed)
  • Bits 3, 4: Pre-emphasis according to input
  • Bit 5: 0 (two channel mode)
  • Bits 6, 7: 00 (Mode 0)

 

Byte 1:

  • Bits 0…6: 0000000 (category code general)
  • Bit 7: 1 (original)

 

Byte 2:

  • Bits 0, 1, 2, 3: Sampling frequency according to input
  • Bits 4, 5: 00 (accuracy grade II)
  • Bits 6, 7: 00

 

Bytes 3…23: Reserved bytes

 

Output selected: Professional format, Input: Professional format:
All bits fed forward (transparent), except for Byte 2:
Bits 0, 1, 2: 001 (max. sample length = 24 Bit)
Bits 3, 4, 5: 101 (24 Bit word-length)
Bits 6, 7: 00

 

Output selected: Professional format, Input: Consumer format:
Byte 0:
Bit 0: 1 (professional)
Bit 1: 0 (audio)
Bits 2, 3, 4: Pre-emphasis according to input
Bit 5: 0 (source fs locked)
Bits 6, 7: Sampling frequency according to input

 

Byte 1:
Bits 0, 1, 2, 3: 0001 (two channel mode)
Bits 4, 5, 6, 7: 0000 (no user Bit encoding)

 

Byte 2:
Bits 0, 1, 2: 001 (max. sample length = 24 Bit)
Bits 3, 4, 5: 101 (24 Bit word-length)
Bits 6, 7: 00

 

Bytes 3…12: All bits 0
Byte 23: CRCC byte

 

Output selected: Transparent, Input: Any format:
All Bits fed forward (transparent), except if EQ not bypassed for Byte 2:
Bits 0, 1, 2: 001 (max. sample length = 24 Bit)
Bits 3, 4, 5: 101 (24 Bit word-length)
Bits 6, 7: 00

 

Overload
Number of consecutive over-samples to cause “over” display: 1…16 selectable

 

Peak Meters
Peak meters timing for compressor input and output stage adhere to AES recommendations.

 

 

Parameter Tables
Overall Gain (dB):
−∞, −80.0, −75.0, −70.0, −65.0, −60.0, −55.0. −50.0, −45.0, −40.0, −35.0, −30.0, −28.0, −26.0, −24.0, −22.0, −20.0, −18.0, −16.0, −14.0, −12.0, −10.0, −9.5, −9.0, −8.5, −8.0, −7.5, −7.0, −6.5, −6.0, −5.8, −5.6, −5.4, − 5.2, −5.0, −4.8, −4.6, −4.4, −4.2, −4.0, −3.8, −3.6, −3.4, −3.2, −3.0, −2.9, −2.8, −2.7, −2.6, −2.5, −2.4, −2.3, − 2.2, −2.1, −2.0, −1.9, −1.8, −1.7, −1.6, −1.5, −1.4, −1.3, −1.2, −1.1, −1.0, −0.9, −0.8, −0.7, −0.6, −0.5, −0.4, − 0.3, −0.2, −0.1, 0.0, 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, 1.0, 1.1, 1.2, 1.3, 1.4, 1.5, 1.6, 1.7, 1.8, 1.9, 2.0, 2.1, 2.2, 2.3, 2.4, 2.5, 2.6, 2.7, 2.8, 2.9, 3.0, 3.2, 3.4, 3.6, 3.8, 4.0, 4.2, 4.4, 4.6, 4.8, 5.0, 5.2, 5.4, 5.6, 5.8, 6.0, 6.5, 7.0, 7.5, 8.0, 8.5, 9.0, 9.5, 10.0

 

Bandwidth (fractions of octaves):
1/6, 1/3, 1⁄2, 2/3, 5/6, 1, 11/6, 1 1/3, 1 1⁄2, 1 2/3, 1 5/6, 2, 2 1/6, 2 1/3, 2 1⁄2, 2 2/3, 2 5/6, 3, 3 1/6, 3 1/3, 3 1⁄2, 3 2/3, 3 5/6, 4, 4 1/6, 4 1/3, 4 1⁄2, 4 2/3, 4 5/6, 5, 5 1/6, 5 1/3, 5 1⁄2, 5 2/3, 5 5/6, 6, 6 1/6, 6 1/3, 6 1⁄2, 6 2/3, 6 5/6, 7, 7 1/6, 7 1/3, 7 1⁄2, 7 2/3, 7 5/6, 8

 

Frequency, center or cut-off (Hz):
41, 44, 46, 49, 52, 55, 58, 62, 65, 69, 73, 78, 82, 87, 92, 98, 104, 110, 117, 123, 131, 139, 147, 156, 165, 175, 185, 196, 208, 220, 277, 294, 311, 330, 349, 370, 392, 415, 440, 466, 494, 523, 554, 587, 622, 659, 698, 740, 784, 831, 880, 932, 988, 1050, 1110, 1170, 1240, 1320, 1400, 1480, 1570, 1660, 1760, 1860, 1980, 2090, 2220, 2350, 2490, 2640, 2790, 2960, 3140, 3320, 3520, 3730, 3950, 4190, 4430, 4700, 4980, 5270, 5590, 5920, 6270, 6640, 7040, 7460, 7900, 8370, 8870, 9400, 9960, 10500, 11200, 11800, 12500, 13300, 14100, 14900, 15800, 16700, 17700

 

Attack, Release Delay, Release Fast & Slow, Average, RMS, Preview when applicable (s):
20μ, 40μ, 60μ, 80μ, 100μ, 125μ, 160μ, 200μ, 250μ, 315μ, 400μ, 500μ, 630μ, 800μ, 1m, 1.25m, 1.60m, 2.00m, 2.50m, 3.15m, 4.00m, 5.00m, 6.30m, 8.00m, 10.0m, 12.5m, 16.0m, 20.0m, 25.0m, 31.5m, 40.0m, 50.0m, 63.0m, 80.0m, 100m, 125m, 160m, 200m, 250m, 315m, 400m, 500m, 630m, 800m, 1, 1.25, 1.60, 2.00, 2.50, 3.15, 4.00, 5.00, 6.30, 8.00

 

Soft-knee:
0.0, 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, 1.0

 

Threshold (dB):
0, −1, −2, −3, −4, −5, −6, −7, −8, −9, −10, −11, −12, −13, −14, −15, −16, −17, −18, −19, −20, −21, −22, −23, − 24, −25, −26, −27, −28, −29, −30, −31, −32, −33, −34, −35, −36, −37, −38, −39, −40, −41, −42, −43, −44, −45, −46, −47, −48, −49, −50, −51, −52, −53, −54, −55, −56, −57, −58, −59, −60

 

Ratio:
1:5.00, 1:4.95, 1:4.90, 1:4.85, 1:4.80, 1:4.75, 1:4.70, 1:4.65, 1:4.60, 1:4.55, 1:4.50, 1:4.45, 1:4.40, 1:4.35, 1:4.30, 1:4.25, 1:4.20, 1:4.15, 1:4.10, 1:4.05, 1:4.00, 1:3.95, 1:3.90, 1:3.85, 1:3.80, 1:3.75, 1:3.70, 1:3.65, 1:3.60, 1:3.55, 1:3.50, 1:3.45, 1:3.40, 1:3.35, 1:3.30, 1:3.25, 1:3.20, 1:3.15, 1:3.10, 1:3.05, 1:3.00, 1:2.95, 1:2.90, 1:2.85, 1:2.80, 1:2.75, 1:2.70, 1:2.65, 1:2.60, 1:2.55, 1:2.50, 1:2.45, 1:2.40, 1:2.35, 1:2.30, 1:2.25, 1:2.20, 1:2.15, 1:2.10, 1:2.05, 1:2.00, 1:1.95, 1:1.90, 1:1.85, 1:1.80, 1:1.75, 1:1.70, 1:1.65, 1:1.60, 1:1.55, 1:1.50, 1:1.45, 1:1.40, 1:1.35, 1:1.30, 1:1.29, 1:1.28, 1:1.27, 1:1.26, 1:1.25, 1:1.24, 1:1.23, 1:1.22, 1:1.21, 1:1.20, 1:1.19, 1:1.18, 1:1.17, 1:1.16, 1:1.15, 1:1.14, 1:1.13, 1:1.12, 1:1.11, 1:1.10, 1:1.09, 1:1.08, 1:1.07, 1:1.06, 1:1.05, 1:1.04, 1:1.03, 1:1.02, 1:1.01, 1 : 1, 1.05:1, 1.11:1, 1.17:1, 1.25:1, 1.33:1, 1.43:1, 1.54:1, 1.67:1, 1.81:1, 2.00:1, 2.22:1, 2.50:1, 2.86:1, 3.33:1, 4.00:1, 5.00:1, 6.66:1, 10.0:1, 20.0:1, 1000:1

 

Gain Makeup (dB):
(The scale is symmetrical around 0.0, only positive values listed)
0.0, 0.2, 0.4, 0.6, 0.8, 1.0, 1.2, 1.4, 1.6, 1.8, 2.0, 2.2, 2.4, 2.6, 2.8, 3.0, 3.2, 3.4, 3.6, 3.8, 4.0, 4.2, 4.4, 4.6, 4.8, 5.0, 5.2, 5.4, 5.6, 5.8, 6.0, 6.5, 7.0, 7.5, 8.0, 8.5, 9.0, 9.5, 10.0, 10.5, 11.0, 12.0, 13.0, 14.0, 15.0, 16.0, 17.0, 18.0, 19.0, 20.0, 22.0, 24.0, 26.0, 28.0, 30.0, 32.0, 34.0, 36.0, 38.0, 40.0, 45.0, 50.0, 55.0, 60.0, off, maximum

 

RMS time (s):
40μ, 60μ, 80μ, 100μ, 125μ, 160μ, 200μ, 250μ, 315μ, 400μ, 500μ, 630μ, 800μ, 1m, 1.25m, 1.60m, 2.00m, 2.50m, 3.15m, 4.00m, 5.00m, 6.30m, 8.00m, 10.0m, 12.5m, 16.0m, 20.0m, 25.0m, 31.5m, 40.0m, 50.0m, 63.0m, 80.0m, 100m, 125m, 160m, 200m, 250m, 315m, 400m, 500m

 

Dither:
Dithering algorithms are implemented using the POW-R set of algorithms, i.e. POW-R #1, POW-R #2, POW-R #3

 

MIDI Remote Control Protocol
All parameters are remote controllable. Each parameter has its corresponding MIDI controller number. According to the different parameters, the controllers are limited in their range. Invalid values are replaced by the maximum allowable values. Details can be found in the DS1-MK3 manual.

 

 


주문안내

저희 기어라운지에서 상품을 주문하는 방법은 크게 5단계입니다.

  • 상품검색

  • 장바구니 담기

  • 주문서 작성

  • 결제방법 선택 및 결제

  • 주문 성공 화면(주문번호)

  • 비회원 주문인 경우 5단계에서 주문번호와 승인번호(카드결제시)를 꼭 메모해 두시기 바랍니다.
  • 단 회원인 경우 자동 저장되므로 따로 관리하실 필요가 없습니다.

   

배송안내

  • 50,000원 이상 구매시 무료배송을 해드리고 있으며, 50,000원 미만 구매시에는 3,000원의 배송비가 부과됩니다.
  • 평일 오후 4시 30분까지 주문/결제가 완료된 주문에 한하여 당일 발송되며, 평균 배송일은 영업일 기준으로 2일(다음날 배송)입니다. 단, 택배사 사정에 의해 1~2일 정도 늦어질 수 있습니다.
  • 기어라운지는 CJ 대한통운 택배를 이용하며, 온라인을 통해 실시간으로 배송조회가 가능합니다. 단 수입처에서 직접 발송되는 경우는 다른 배송사를 이용할 수 있습니다.
  • 제품의 공급이 원활하지 않은 경우, 혹은 제작 케이블 등 상품 준비에 시간이 필요한 경우는 발송이 지연될 수 있습니다. 단, 2일 이상 배송이 지연되는 경우 따로 연락을 드립니다.
  • 전자배송의 경우, 바로 배송이 되지 않으며, 영업일을 기준으로 평균 2,3일(다음날 혹은 그 다음날)의 배송 기간이 소요됩니다.

교환 및 반품안내

  • 기어라운지는 소비자의 보호를 위해서 규정한 제반 법규를 준수합니다.
  • 주문 취소는 미결제인 상태에서는 고객님이 직접 취소하실 수가 있습니다. 결제 후 취소는 저희 고객센터 1688-1176 (평일 10:30 – 18:30 상담가능, 토/일/공휴일 휴무)로 문의해 주시기 바랍니다.
  • 무통장 입금의 경우 일정기간 동안 송금을 하지 않으면 자동 주문 취소가 되고, 구매자가 원하는 경우 인터넷에서 바로 취소 하실 수도 있습니다.
  • 반송 전에는 고객센터를 통해 반품이나 교환 가능 여부에 대한 상담을 받으시고, 반송 예약을 하셔야 합니다. 반송을 하실때에는 주문번호, 회원번호를 메모하여 보내주셔야 보다 신속한 처리에 도움이 됩니다.

적립금 및 쿠폰 안내

  • 제품을 구입하시거나 커뮤니티에 게시물을 남기시면 차등된 적립금을 제공하여 드립니다.
  • 적립금 1점은 현금 1원과 같습니다. 적립금이 10,000점 이상일 때 사용이 가능하며, 총 주문액의 50% 미만으로만 사용이 가능합니다.
  • 제품에 따라 구매 완료시 제공되는 쿠폰은 상품페이지에서 확인이 가능하며, 쿠폰 사용시 일부 이벤트 참여에 제약을 받으실 수 있습니다.

문의

  • 전화 : 1688-1176 (평일 10:30 – 18:30 상담가능, 토/일/공휴일 휴무)
  • 이메일 : gearlounge@gearlounge.com

반송주소 : 서울 마포구 서교동 396-15번지 1,2층 기어라운지 (T. 1688-1176)

검색어를 입력하고 엔터를 누르세요.