SSL-Network-IO_MADI-Bridge
SSL-Network-IO_MADI-BridgeSSL-Network-IO_range

Network I/O: MADI-Bridge

[가격문의]

상품설명

Network I/O: MADI-Bridge

 

Standalone Broadcast Specification MADI to IP Audio Network Interface

The SSL Network I/O: MADI-Bridge is a broadcast specification bridge between the industry standard MADI audio format and IP audio network’s using Dante. The MADI-Bridge enables C100 and C10 Digital Broadcast Consoles or any other standard MADI device to connect to Dante based IP Audio networks with full redundancy maintained.

With 64 channels per Bridge (@ 48kHz) and up to 512 channels per 1GB network link, Dante is fully scalable and capable of providing routing channel counts from tens to thousands and beyond using standard IT infrastructure. Redundant PSU, MADI ports and IP Network ports mean the Bridge is built for uninterrupted operation, keeping critical devices and audio paths functioning throughout the broadcast facility. In addition to the inbuilt clock redundancy options in Dante controller, the MADI-Bridge also includes a pair of redundant sync inputs for use as a self-redundant Dante Grand master clock. 32bit MADI control tunnelling allows a pair of MADI-Bridges to be used to pass audio and user bits of a whole MADI stream across a network. Remote locating existing MADI Mics or increasing cost efficiency of an existing fibre cable beyond a single MADI stream is now a simple task. The Bridge also features Bidirectional sample rate conversion between any asynchronous sample rates, from 44.1kHz to 192kHz. Intended for use with Dante controller and third party Dante products, the MADI-Bridge shows commitment to interoperability while understanding Broadcasters critical needs.

The SSL MADI-Bridge features a front panel headphone socket (with rotary level control) and inbuilt headphone monitor routing, to truly replace traditional patch bay confidence routing and fault finding functionality with equivalents in the IP Audio domain. Simple font panel controls facilitate routing mono or stereo paths from MADI In, MADI Out, Dante In or Dante Out directly to the headphones. A front panel LCD screen provides signal present metering selectable to show four points in the signal chain: MADI In, MADI Out, Dante In and Dante Out. GPIO connections allow for transfer of tally info and switching functions across the network with the Audio.

 

Key Features

  • Interface between MADI and IP Audio Networks using Dante
  • Redundant: PSU, MADI ports, Dante Ports, Sync In – Full Broadcast Spec Redundancy
  • Bidirectional sample rate conversion between any asynchronous sample rates, from 44.1kHz to 192kHz.
  • 32bit MADI control tunnelling
  • GPIO connectivity – embed tallies across the network
  • Redundant Network extension ports – Local IO at bridge without a switch
  • Word Clock out – Clock a MADI device to the Dante Network
  • Virtual Headphone Patch- 4 location Monitoring and Signal Present Metering to truly replace your patch bay with a digital network while retaining confidence and fault finding tools
  • Lockout Mode – Prevent accidental alteration of front panel settings

 

 

Superior SSL technology and sound for Dante IP Audio Networks


 

SSL Network I/O is a range of I/O devices which bring SSL’s renowned quality and innovation to Dante based IP Audio networks. IP Audio networking provides a hugely versatile solution for environments where audio assets are shared by multiple users across multiple recording areas and control rooms. Dante is a commercially developed IP Audio network protocol. It uses standard IT infrastructure (Ethernet cables, connections and network routers & switches) for audio transport, routing, device discovery and control. With more than 350 Dante enabled products by more than 150 different manufacturers already released, Dante is considered by many to already be the established industry choice for the use of IP networks for audio distribution. IP audio networking offers a fresh approach to audio routing and asset sharing for audio production with a wide range of benefits:

 

  • High Channel Counts: 512ch @ 48kHz (256 @ 96kHz) on a single 1GB connection
  • Guaranteed Interoperability: plug & play discoverability of more than 500 devices from 220 different manufacturers – and growing
  • Remote Device Control: parameters configured anywhere on the network
  • Reduced Cost: standard low cost IT hardware, standard and/or existing Cat 5 or Cat 6 cabling with audio and control on the same network down a single cable
  • Simplified Interconnectivity: Ethernet/IP connectivity simplifies interfacing with a wide range of devices including Intercoms
  • Flexible Scalability: systems can grow as your needs evolve. Want a bigger network? Add another switch!
  • Full Network Redundancy: technology tried and tested across many industries and fully compatible with all network redundancy models
  • Distributed Routing Control: routing control from unlimited devices or terminals
  • Absolute Resilience: catastrophic failure of a single device will have no effect on any other devices in the network
  • Standards compliant: IEEE and IETF compliant thus deployable on and can mix with traffic on any standard IP infrastructure.
  • With Dante committed to conform with AVB standards and with AES67, the SSL Network I/O range is ready for future networked audio developments.

 

The SSL Network I/O range was developed initially for use in broadcast installations. There is a wealth of detailed information about IP Audio Networking and Dante in our extensive white Paper: IP Audio Networking. Professional AoIP for Broadcast – The Way Forward. If you are new to IP Audio and/or multi-space audio routing and distribution it is essential reading.

 

 

 

Specifications


madi-bridge


주문안내

저희 기어라운지에서 상품을 주문하는 방법은 크게 5단계입니다.

  • 상품검색

  • 장바구니 담기

  • 주문서 작성

  • 결제방법 선택 및 결제

  • 주문 성공 화면(주문번호)

  • 비회원 주문인 경우 5단계에서 주문번호와 승인번호(카드결제시)를 꼭 메모해 두시기 바랍니다.
  • 단 회원인 경우 자동 저장되므로 따로 관리하실 필요가 없습니다.

   

배송안내

  • 50,000원 이상 구매시 무료배송을 해드리고 있으며, 50,000원 미만 구매시에는 3,000원의 배송비가 부과됩니다.
  • 평일 오후 4시 30분까지 주문/결제가 완료된 주문에 한하여 당일 발송되며, 평균 배송일은 영업일 기준으로 2일(다음날 배송)입니다. 단, 택배사 사정에 의해 1~2일 정도 늦어질 수 있습니다.
  • 기어라운지는 CJ 대한통운 택배를 이용하며, 온라인을 통해 실시간으로 배송조회가 가능합니다. 단 수입처에서 직접 발송되는 경우는 다른 배송사를 이용할 수 있습니다.
  • 제품의 공급이 원활하지 않은 경우, 혹은 제작 케이블 등 상품 준비에 시간이 필요한 경우는 발송이 지연될 수 있습니다. 단, 2일 이상 배송이 지연되는 경우 따로 연락을 드립니다.
  • 전자배송의 경우, 바로 배송이 되지 않으며, 영업일을 기준으로 평균 2,3일(다음날 혹은 그 다음날)의 배송 기간이 소요됩니다.

교환 및 반품안내

  • 기어라운지는 소비자의 보호를 위해서 규정한 제반 법규를 준수합니다.
  • 주문 취소는 미결제인 상태에서는 고객님이 직접 취소하실 수가 있습니다. 결제 후 취소는 저희 고객센터 1688-1176 (평일 10:30 – 18:30 상담가능, 토/일/공휴일 휴무)로 문의해 주시기 바랍니다.
  • 무통장 입금의 경우 일정기간 동안 송금을 하지 않으면 자동 주문 취소가 되고, 구매자가 원하는 경우 인터넷에서 바로 취소 하실 수도 있습니다.
  • 반송 전에는 고객센터를 통해 반품이나 교환 가능 여부에 대한 상담을 받으시고, 반송 예약을 하셔야 합니다. 반송을 하실때에는 주문번호, 회원번호를 메모하여 보내주셔야 보다 신속한 처리에 도움이 됩니다.

적립금 및 쿠폰 안내

  • 제품을 구입하시거나 커뮤니티에 게시물을 남기시면 차등된 적립금을 제공하여 드립니다.
  • 적립금 1점은 현금 1원과 같습니다. 적립금이 10,000점 이상일 때 사용이 가능하며, 총 주문액의 50% 미만으로만 사용이 가능합니다.
  • 제품에 따라 구매 완료시 제공되는 쿠폰은 상품페이지에서 확인이 가능하며, 쿠폰 사용시 일부 이벤트 참여에 제약을 받으실 수 있습니다.

문의

  • 전화 : 1688-1176 (평일 10:30 – 18:30 상담가능, 토/일/공휴일 휴무)
  • 이메일 : gearlounge@gearlounge.com

반송주소 : 서울 마포구 서교동 396-15번지 1,2층 기어라운지 (T. 1688-1176)

검색어를 입력하고 엔터를 누르세요.